Skip to main content
SunoMV SunoMV

Free BPM Finder & Song Key Finder

Drop an audio file and this song BPM finder reads the tempo and musical key — with the Camelot code DJs use for mixing — plus the half-time, double-time and swing readings a single number hides. No file? Tap along to any song for an instant tempo. Everything runs in your browser; your audio never leaves your device.

File analyzer + tap tempo Key + Camelot code Half/double-time shown Nothing uploaded · free

Getting the upload area ready…

This only takes a moment

Add SunoMV as a preferred source on Google See more SunoMV in Top Stories and AI answers.
What it does
BPM + song key detection
Two modes
Tap tempo or audio file
Privacy
Runs in your browser — no upload
Price
Free · no sign-up

One page, both numbers

Most BPM finders make you choose: a tap tempo pad with no key detection, or an uploader that sends your unreleased track to someone's server. This one does both jobs locally — tap for a quick reading, or drop the file for BPM plus key with the Camelot code — and your audio never leaves the device. When the numbers are in, SunoMV can turn the same song into a lyric-synced music video.

How to find a song's BPM and key

Three steps, nothing to install, nothing uploaded.

  1. 1

    Pick your mode

    Tap Tempo when the song is playing anywhere; Analyze a File when you have the audio itself.

  2. 2

    Tap or drop

    Tap the pad (or spacebar) on the beat — or drag in an MP3, WAV, M4A, OGG or FLAC.

  3. 3

    Read BPM and key

    Get the tempo, the detected key with its relative, and the Camelot code for harmonic mixing.

How the tap tempo BPM tapper works

Tap the pad — or the spacebar — in time with the beat and the BPM tapper converts your tap intervals into beats per minute. It averages your most recent eight taps, so the number steadies within a bar or two, and a two-second pause resets the run for the next song. That's all a tap BPM tool needs: your ears, a steady finger, and about ten seconds.

  • Averages your last 8 taps — One rushed tap won't wreck the reading — the rolling average smooths out human timing.
  • Spacebar or click — Tap with the keyboard while the song plays in another tab, or click the pad on your phone.
  • Auto-reset between songs — Pause two seconds and the next tap starts a fresh measurement — no reset hunting mid-set.

A song key finder that reads the file itself

When you have the actual audio, skip the tapping: this key and BPM finder decodes your file locally, follows the energy of the beat to estimate tempo, and builds a harmonic fingerprint of the track to detect its key. You get BPM, the song key (like C Major or A Minor), its relative key, and the Camelot wheel code — the shorthand DJs use to pick harmonically compatible tracks.

  • BPM from the waveform — Onset detection plus autocorrelation locks onto the beat grid — typically within ±2 BPM on steady tracks.
  • Song key detector with Camelot — The key detector matches the track's harmonic profile against all 24 major and minor keys, then adds the Camelot code for mixing.
  • Nothing is uploaded — Decoding and analysis happen entirely in your browser — your song never touches a server.

Why BPM and key matter for your own releases

Tempo and key are the two numbers that make your music usable — by you and by others. Producers match samples and loops by BPM; DJs build sets by Camelot-compatible keys; editors cut video to the beat grid. If you make songs with AI tools like Suno, knowing the BPM of your track tells you exactly how to pace cuts, captions and scene changes when you turn it into a video.

  • Match loops and samples — Knowing the exact tempo lets you drop a track into any DAW project without time-stretch guesswork.
  • Mix in key — Adjacent Camelot codes (8B → 9B, or 8B → 8A) blend smoothly — the whole point of harmonic mixing.
  • Cut video on the beat — A 120 BPM song has a beat every 0.5 s — sync your edits, lyrics and transitions to that grid.

We measured the BPM of 16 songs across 16 genres

Each track's composer published its tempo, so every reading can be checked. Here's what this BPM finder read, what an independent detector read, and where the two disagree with the composer.

Tracks: 16 pieces by Kevin MacLeod from incompetech.com, chosen to cover EDM, funk, disco, blues, hip-hop, trap, a slow jam, reggae, bossa nova, salsa, bluegrass, ska, jazz, metal, a 6/8 ballad and ambient piano. All are Creative Commons Attribution 4.0, and each has a tempo published by the composer ("Stated").

This tool: each full MP3 decoded to 44.1 kHz mono and run through the same detectBpm code this page runs in your browser. We show its first reading and any other strong candidates it lists. Check: librosa 0.11 beat_track (hop 128) on the same file. Readings are rounded to whole BPM. A reading counts as a match when it is within 4% of the stated tempo. Measured November 12, 2026. Your browser may decode at a different sample rate, so the same file can read a BPM or two differently here.

Track Genre Stated This tool librosa Result
EDM Detection Mode EDM 128 128 128 Match Four-on-the-floor kick: the easy case for any detector.
Funky Chunk Funk 115 115 + 77 · 92 · 152 115 Match Both detectors agree with the composer.
Disco Medusae Disco 115 115 + 77 115 Match Steady disco hats: clean match.
OctoBlues 12-bar blues 120 120 91 Match librosa read 91, close to the 3:4 shuffle echo (90).
River Valley Breakdown Bluegrass 130 130 + 86 129 Match Both detectors agree with the composer.
Bossa Antigua Bossa nova 70 71 + 96 140 Match librosa counted double time (140).
Montego Reggae 73 75 + 62 · 91 148 Match One-drop reggae: librosa doubled it to 148.
Just As Soon Ballad (6/8) 109 110 + 74 111 Match Composer calls it a slow 6/8; 74 is the 2:3 reading.
Burn The World Waltz Metal waltz (3/4) 177 177 + 117 · 70 175 Match Fast 3/4 still locks cleanly.
Deuces 1960s jazz 190 95 + 63 128 Half / double Swing at 190: the tool read half (95; 191 shown as double), librosa read 2:3 (128).
No Frills Salsa Salsa 144 73 + 98 146 Half / double The tool read the half-time pulse (73; 145 shown as double).
Slow Jam Slow jam 75 148 150 Half / double Both detectors read double time (148 / 150).
Lewis and Dekalb Trap 72 96 + 72 · 144 · 115 144 In alternates First reading landed on 4:3 (96); 72 is listed; librosa doubled to 144.
Upbeat Forever Ska 164 110 + 82 · 65 · 167 109 In alternates Both detectors read 2:3 (110 / 109); 167 is listed.
Immersed Ambient piano 64 139 + 123 · 64 · 185 126 In alternates Sparse, droney piano: the readings scatter; 64 is listed.
Griphop Hip-hop 90 120 90 Miss The tool read 4:3 (120) and didn't list 90; librosa got it. Tap to confirm.

One number is right about half the time

The first reading matched the composer on 9 of 16 tracks; librosa matched on 8. Count the half/double values the panel already shows and both reach 12 of 16. Add the listed alternates and this tool covers 15 of 16. Use the numbers as candidates, not a verdict.

Genre predicts the trap

Four-on-the-floor EDM, disco, funk and bluegrass matched on both detectors. The slow jam, salsa, bossa and reggae tracks flipped to half or double on at least one detector. Swing jazz, ska, trap and 6/8 produced 2:3 and 3:4 readings. The ambient piano piece scattered across candidates on both.

For video edits, the grid matters more than the label

75 and 150 BPM share the same beat grid: a cut every 0.8 s is every beat at 75, or every second beat at 150. A 2:3 reading, though, sits on a different grid and cuts will drift off the music. When the candidates disagree by 2:3 or 3:4, tap along before you edit.

Music by Kevin MacLeod (incompetech.com), licensed under Creative Commons: By Attribution 4.0. Tracks were analyzed offline; no audio is embedded or hosted on this page.

Made in SunoMV · real exports

See what a song turns into

Every sample below is an untouched SunoMV export: 3 AI storyboard shots, one AI-filmed clip, then the lyrics. Each one uses a different caption style and frame size.

All 13 samples →
Make one like this Free to start. No editing skills needed.

Who uses a BPM and key finder

Anyone who needs a track's numbers before the next creative step.

Producers and beatmakers

Match samples, set the project tempo, and check what key a reference track sits in before you build around it.

DJs planning sets

Read the Camelot code and line up harmonically compatible transitions instead of clashing keys.

AI-music creators

Made a song in Suno? Get its BPM and key, then cut a lyric-synced music video timed to the same grid.

From numbers to a finished video

The rest of the SunoMV toolkit picks up where the analysis ends.

Frequently Asked Questions

Ask us anything!

Related guides

Got your BPM? Give the song a video

Paste your Suno song link into SunoMV and get a lyric-synced music video in minutes — cuts and captions timed to the beat you just measured. Free to try.